Dr Karl Alexander Stol

PhD and MS in Aerospace Engineering Science, University of Colorado at Boulder, 2001; BE (First Class Honours) in Mechanical Engineering, University of Canterbury, 1996

Biography

Karl Stol earned his PhD in Aerospace Engineering Science at the University of Colorado at Boulder, in developing structural dynamics models and control systems for modern wind turbines. Since joining the University of Auckland in 2004, he has supervised over 100 project students and co-authored over 90 refereed publications in the application of control techniques to wind energy, mobile robotics, and Unmanned Aerial Vehicles.

Research | Current

  • Control system modelling and simulation
  • Multivariable control system design
  • Navigation and motion control of mobile robots and Unmanned Aerial Vehicles (UAVs, drones)

Teaching | Current

ENGGEN 150 - Advanced Mechanics and Mathematical Modelling
MECHENG 322 - Control Systems
MECHENG 724 - Multivariable Control Systems

Postgraduate supervision

PhD Students

Current:
D. De Mel, Autonomous UAV object following, to complete in 2020
J. Bannwarth, UAV sensor fusion and surface interaction, to complete in 2018
J. Kutia*, Aerial manipulation, to complete in 2017
L. Xie*, Energy efficient omni-wheeled robot, to complete in 2017
O. Grant, Flight controller assessment of the Martin Jetpack, to complete in 2016

Past:
Z. Chen, Smart rotors for next generation wind turbines, 2017
L. Postelnik, Practical output regulation of non-minimum phase nonlinear systems, 2016
R. Chan, Traction control of two-wheeled robots with model predictive control, 2016
Z. Kausar, Stability augmentation of two-wheeled mobile robots on pedestrian terrain, 2014
A. Kumar, Multivariable control of wind turbines for fatigue load reduction in the presence of nonlinearities, 2012
H. Namik, Individual pitch and disturbance accommodating control of floating offshore wind turbines, 2012
G. Ferrari*, Development of an aeroelastic simulation for the analysis of vertical-axis wind turbines, 2012

Master of Engineering Students (by thesis)

Past:
S. Jiang, Under-canopy autonomous flight control of a UAV, 2016
C. Chun, Vehicle motion estimation using low-cost optical flow and sensor fusion, 2012
M. Spencer, Model predictive control of a wind turbine using short term wind field predictions, 2011
D. Jones, Stability of two-wheeled robots in low-traction environments, 2011
T. Tan, Wind disturbance estimation on wind turbines, 2011
Y-H. Yang, Real time simultaneous localisation and mapping, 2008
T. Kim*, Control of a 3 DOF quadrotor model, 2007
W. Zhao, Individual blade pitch for active yaw control of a horizontal-axis wind turbine, 2006

* = as a co-supervisor

Distinctions/Honours

2007 Early Career Teaching Excellence Award, Faculty of Engineering
2005 UoA Spark $40k Challenge Winner in a team of 5

Responsibilities

  • Head of BE Mechanical Programme
  • Dynamics and Control Teaching Group Convenor
  • Mechanical course advisor
  • University General Education Board of Studies
  • University representative on the Mechanical Engineering Group committee of IPENZ

Committees/Professional groups/Services

Senior Member, American Institute of Aeronautics and Astronautics (AIAA)
Member, Institute of Electrical and Electronic Engineers (IEEE)

Selected publications and creative works (Research Outputs)

  • Postelnik, L., Swain, A. K., & Stol, K. A. (2017). Approximate stable system centre approach to output tracking of non-minimum phase nonlinear systems. Journal of the Franklin Institute, 354 (8), 3322-3340. 10.1016/j.jfranklin.2017.01.007
    Other University of Auckland co-authors: Akshya Swain
  • Chen, Z. J., Stol, K. A., & Mace, B. R. (2016). Wind turbine blade optimisation with individual pitch and trailing edge flap control. Renewable Energy, 103, 750-765. 10.1016/j.renene.2016.11.009
    URL: http://hdl.handle.net/2292/32985
    Other University of Auckland co-authors: Zhenrong Chen, Brian Mace
  • Chen, Z. J., Stol, K. A., & Mace, B. R. (2016). System identification and controller design for individual pitch and trailing edge flap control on upscaled wind turbines. Wind Energy, 19 (6), 1073-1088. 10.1002/we.1885
    URL: http://hdl.handle.net/2292/28787
    Other University of Auckland co-authors: Zhenrong Chen, Brian Mace
  • Grant, O. L., Stol, K. A., Swain, A., & Hess, R. A. (2015). Handling Qualities of a Twin Ducted-Fan Aircraft: An Analytical Evaluation. Journal of Guidance, Control, and Dynamics, 38 (6), 1126-1131. 10.2514/1.G000826
    Other University of Auckland co-authors: Akshya Swain
  • Namik, H, & Stol, K. A. (2014). A Review of Floating Wind Turbine Controllers. In P. M. Pardalos, S. Rebennack, M. V. F. Pereira, N. A. Iliadis, V. Pappu (Eds.) Handbook of Wind Power Systems (pp. 415-441). Berlin: Springer. Related URL.
    Other University of Auckland co-authors: Hazim Namik
  • Namik, H., & Stol, K. (2014). Individual Blade Pitch Control of a Spar-Buoy Floating Wind Turbine. IEEE Transactions on Control Systems Technology, 22 (1), 214-223. 10.1109/TCST.2013.2251636
    Other University of Auckland co-authors: Hazim Namik
  • Kausar, Stol, K. A., & Patel, N. (2013). Lyapunov Function-Based Non-Linear Control for Two-Wheeled Mobile Robots. International Journal of Biomechatronics and Biomedical Robotics, 2 (2/3/4), 172-183. 10.1504/IJBBR.2013.058724
    URL: http://hdl.handle.net/2292/21511
    Other University of Auckland co-authors: Nitish Patel
  • Spencer, M. D., Stol, K. A., Unsworth, C. P., Cater, J. E., & Norris, S. E. (2013). Model Predictive Control of a Wind Turbine using Short Term Wind Field Predictions. Wind Energy, 16 (3), 417-434. 10.1002/we.1501
    Other University of Auckland co-authors: John Cater, Charles Unsworth, Stuart Norris

Identifiers

Contact details

Primary location

ENGINEERING BLOCK 1 - Bldg 401
Level 9, Room 905
20 SYMONDS ST
AUCKLAND 1010
New Zealand

Web links